Robot Pool Cleaner Tips: Should I Run My Pool Filter When It’s Raining?

Should I Use My Pool Filter When It’s Raining?

When the rain comes down, many pool owners ask themselves — should I run my pool filter during the rain? Whether that is or not is driven by a few critical factors. If you have a robot pool cleaner like the Beatbot AquaSense 2 Pro, you must know the right approach in the event of rain and proper filtration and pool safety.

Your robot pool cleaner is meant to do its thing in various weather conditions, but it’s good. There are dos and don’ts to be followed during rain. In this article, we’ll take a closer look at what happens to your pool during a storm, how it impacts water quality, and some steps to take to keep your pool vacuum, skimmer, and cleaning systems safe.

Reasons To Run Your Filter While It‟’s Raining

Rainwater can contaminate your pool with dirt, leaves, algae spores, and even acid rain. In such cases, your pool cleaning robot and vacuum cleaner may become ineffective unless the pool water is effectively circulated and filtered.

So, reasons to run your pool filter during light or moderate rain:

It allows quicker balancing of water chemistry through the circulation of treated water.

It stops debris from accumulating in the skimmer or on the bottom of the pool.

Due to this running, you will have clean water to support your robotic pool cleaner.

However, such conditions are only good for your pool if heavy rain, thunder, or lightning are not present. Be sure to turn off all electronic devices in the affected area immediately, including your robot pool system and filter.

Can You Run a Robot Pool Cleaner in the Rain?

Your robot pool cleaner, particularly an ultra-efficient model like the Beatbot AquaSense 2 Ultra, is water-resistant, but this doesn’t mean every component can withstand a rainstorm. Anything with a power supply remaining outside could be exposed, including swimming pool robots.

Beatbot: Built to Perform Under Any Circumstance

Beatbot AquaSense 2, Beatbot AquaSense 2 Ultra, and Beatbot AquaSense 2 Pro are designed with rain-based smart water sensors, dynamic filtration, and scheduling to suit the weather. If you want to incline the pool with intelligent rain detection, check out the innovative tech of this brand, Beatbot.

Unlike older models or some Maytronics pool cleaner units, the Beatbot’s power supply is low-voltage and frequently rain-resistant (always refer to your manual for such information). This keeps out the dirt for quick clean-up after the rain.

Will Rain Make Algae More Of A Concern?

Absolutely. Rain brings in phosphates and other nutrients that promote algal growth. Your robot pool cleaner can collect algae to a degree, but brushing and chemicals may be necessary if you have a full-blown bloom. Find out more in our guide: Will a Pool Robot Catch Algae?

What About Booster Pumps?

Pressure-side cleaners usually require a booster pump (though robotic ones do not). Switching from a traditional system to a robotic pool cleaner eliminates the need for a booster pump altogether. That’s part of what makes robot pool systems so energy-efficient.

CONCLUSION: Using Robot Pool Cleaner With Rain

So, light rain won’t require you to stop the filter on your pool, but you should definitely stop your robot pool cleaner, especially if it’s plugged into an outdoor power source. Be sure to follow safety guidelines and manufacturer instructions. With smart models like Beatbot Aquasense 2, developed and manufactured by Beatbot for Bad AG, you have everything you need to handle your pool in all conditions.